I am the completely new to the Tango Controls
I am installing Tango 9 on Windows 7-64bit, MySQL 5.7
I have problems with TangoTest device server ,why i cant see the server under my tango host
Details all in the picture
I have try the java1.7,java1.8,and now my java vision is 1.9
my database and starter are running well
Can someone give me some advises to fix this?
Hi Zeng Peiying,
Welcome to the TANGO community!
The image says that your TangoTest server is already running. You may kill the TangoTest process from TaskManager of Windows and follow the document at this link: https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/index.html
You shall add the TangoTest as a controlled server as guided on the above documentation.
Hope it helps.
Kind regards,
Jyotin
[quote=“Po”]Hi Zeng Peiying,
Welcome to the TANGO community!
The image says that your TangoTest server is already running. You may kill the TangoTest process from TaskManager of Windows and follow the document at this link: https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/index.html
You shall add the TangoTest as a controlled server as guided on the above documentation.
Hope it helps.
Kind regards,
Jyotin
[/quote]
Thank you help,maybe i dont describe clearly
what i want to say is i can start the tangotest/test from the control panel,
and i can see this process at taskmanager of windows.
But,the tangotest/test dont display at the control panel.
even i started more servers, i cant see nothing at the control panel
as the picture show, i started 3 tangotest as different names,but no one showed at the control panel
I try these steps again,and still nothing display at the host’s control panel
i think i follow the steps of the documentation well
what can i do to fix this problem?
Hi,
I think your tangotest DS is working without problem:
- your 2d snapshot of sys/tg_test/1 shows “exported : true” so the device server (DS) is launched and works
- the other snapshots show astor windows. Astor is a GUI for TANGO starter service. This service is used to manage device servers but it is not mandatory to launch a DS (documentation can be found here: https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/index.html).
To understand what you want:
- do you want to launch a GUI for TangoTest DS ? (launch “atkpanel sys/tg_test/1” will do this)
- do you want to manage sys/tg_test/1 device through Astor ? (you should then read the doc through the link given upside).
Regards.
[quote=“philippeg”]To understand what you want:
do you want to launch a GUI for TangoTest DS ? (launch “atkpanel sys/tg_test/1” will do this)
do you want to manage sys/tg_test/1 device through Astor ? (you should then read the doc through the link given upside).[/quote]
thank for you help!
i want to manage sys/tg_test/1 device through Astor and i want this server display at astor
my attachments have two pictures, 2nd is come from the link that you provide, 1st is come from my astor
for 2nd picture,the have many hosts are running with green led, double chick one host will open the control panel,and the running servers are display under level1/Level2/Level3 with green led.
for 1st picture,it has a running host with green led,but when you double chick it to open control panel, nothing is display at the popup windows: no level1/Level2/Level3, no led, no sys/tg_test/1
(i have launched the sys/tg_test/1 by astor(using the button:Start New ) .and server info shows “exported : true” ,so the device server is working)
if i want to using astor to manage sys/tg_test/1, it must display at the popup windows first, then I can do the follow-up operation.
till now，i dont fix this problem,Can anyone help me?:-(:-(
Hi,
In theory, you should be able to see your device server in the Astor Control Window of your host under the section “Not Controlled” but it seems there is no such section in your case… Not yet clear why… But this is maybe because of the fact that the host name is all uppercase and your starter instance name is lowercase? or maybe because you are on Windows…? The Starter/astor expert will hopefully get a better idea when he will be back from holidays.
What I would do if I were you would be:
- to kill the TangoTest device server, using whatever solution you prefer (Task manager or kill command from TangoTest admin device dserver/tangotest/test)
- to start your device server using astor as you already tried to do. But this needs to be done while the device server is not currently running so the first step is important.
Then you should be able to see TangoTest/test in astor. If not, I would then try to rename the starter instance and put it all in uppercase (Starter/8XNU…T6A) since your host seems to be defined in uppercase and restart the Starter.
Hi, and happy new year,
by default, device servers are not controlled by Astor so it is normal behavior that no DS appears on astor if no DS has been configured with astor.
Since your device servers are launched, to control a DS through Astor, you need to:
- add a new host associated to the computer where your DS runs (https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_host.html)
- add the device server to the ones controlled by Astor (https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_server.html)
Did you try to follow these steps? If yes, where exactly does it fails?
Regards.
Edit:
Reynald overtook me. 
Please note I am not an astor expert.
However, you could right-click on “Not controlled” text and select on “Expand Tree”, does it make appear some DS?
[quote=“philippeg”]Hi, and happy new year,
by default, device servers are not controlled by Astor so it is normal behavior that no DS appears on astor if no DS has been configured with astor.
Since your device servers are launched, to control a DS through Astor, you need to:
- add a new host associated to the computer where your DS runs (https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_host.html)
- add the device server to the ones controlled by Astor (https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_server.html)
Did you try to follow these steps? If yes, where exactly does it fails?
Regards.
Edit:
Reynald overtook me.
Please note I am not an astor expert.
However, you could right-click on “Not controlled” text and select on “Expand Tree”, does it make appear some DS? [/quote]
thank for you help very much
I add the host and DS all followed the steps you mentioned above.
These are also the steps mentioned in the teaching manual.
i launch the DS from the Astor,not from other tools…
and, nothing happen when i right-click on “Not controlled” text:'(
or,i think Astor does not display due to lack of plug-in?
[quote=“Reynald”]Hi,
In theory, you should be able to see your device server in the Astor Control Window of your host under the section “Not Controlled” but it seems there is no such section in your case… Not yet clear why… But this is maybe because of the fact that the host name is all uppercase and your starter instance name is lowercase? or maybe because you are on Windows…? The Starter/astor expert will hopefully get a better idea when he will be back from holidays.
What I would do if I were you would be:
- to kill the TangoTest device server, using whatever solution you prefer (Task manager or kill command from TangoTest admin device dserver/tangotest/test)
- to start your device server using astor as you already tried to do. But this needs to be done while the device server is not currently running so the first step is important.
Then you should be able to see TangoTest/test in astor. If not, I would then try to rename the starter instance and put it all in uppercase (Starter/8XNU…T6A) since your host seems to be defined in uppercase and restart the Starter.[/quote]
i will try to rename the starter with all in uppercase .thank you
Hi Peipei
Could you try to test your database device server as shown on picture.
If everything is fine, you will see your servers registered for specified host in device response.
The argument is your host name.
Pascal
[quote=“Pascal”]Hi Peipei
Could you try to test your database device server as shown on picture.
If everything is fine, you will see your servers registered for specified host in device response.
The argument is your host name.
Pascal
[/quote]
I think the test is ok.as the picture show…
but it dont display at astor’s control panel
Could you show a snapshot of the window with the configuration to check the syntax is correct?
Hi
Your picture has no link to mine.
My request was to test the Database device, not yours.
Please could you do the test as specified and send me the result.
[quote=“Pascal”]Hi Peipei
Could you try to test your database device server as shown on picture.
If everything is fine, you will see your servers registered for specified host in device response.
The argument is your host name.
Pascal
[/quote]
I have update the picture
[quote=“philippeg”][quote=“peipei”]
I add the host and DS all followed the steps you mentioned above.
[/quote]
Could you show a snapshot of the window with the configuration to check the syntax is correct?
[/quote]
sorry i dont understand what configuration you want..
could you tell me more details?o_O
thank you
[quote=“peipei”][quote=“philippeg”][quote=“peipei”]
I add the host and DS all followed the steps you mentioned above.
[/quote]
Could you show a snapshot of the window with the configuration to check the syntax is correct?
[/quote]
sorry i dont understand what configuration you want..
could you tell me more details?o_O
thank you
[/quote]
I mean the configuration you entered at the step described in https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_host.html
Hi
Seeing your picture I confirm that your server TangoTest/test is NOT registered (not running) on your machine named ZPY-PC.
Why ? I don’t know.
A problem at server startup ?
Normally, when a server start it register itself in database as running on the host.
The Starter/Astor tool will get server list using this feature.
But in your case, we cannot see TangoTest/Test on host ZPY-PC.
[quote=“philippeg”][quote=“peipei”][quote=“philippeg”][quote=“peipei”]
I add the host and DS all followed the steps you mentioned above.
[/quote]
Could you show a snapshot of the window with the configuration to check the syntax is correct?
[/quote]
sorry i dont understand what configuration you want..
could you tell me more details?o_O
thank you
[/quote]
I mean the configuration you entered at the step described in https://tango-controls.readthedocs.io/en/latest/tools-and-extensions/astor/add_host.html
[/quote]
i have copy the tangotest.exe to C:\DeviceServers\bin
TANGO_HOST=ZPY-PC:10000
other config as pictures show
am i right?